EasyManuals Logo

Yealink CTP18 Administrator's Guide

Yealink CTP18
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
| Traditional Deployment Methods | 60
• Configuring Route Traversal
Port Forwarding
The most common scenario is deploying the VCS in an intranet (behind a firewall). You must assign a static
private IP address to the VCS. In the meantime, do port forwarding on the firewall.
Port forwarding is an application of network address translation (NAT) that redirects a communication
request from one address and port number combination to another while the packets are traversing a
network gateway, such as a router or firewall.
To receive a public-to-private call, you must forward the following ports to the public network on your router
or firewall.
Port Port Static NAT/Type
H.323 1719-1720 UDP/TCP
Control and media for audio,
video, content, and data/FECC
50000-51000 TCP/UDP
Web management port (optional) 443 TCP
SIP (optional) 5060-5061 TCP/UDP
Note: Forwarding the ports to the public network may cause security problems and you can
prevent the endpoint from being attacked by adding a blacklist.
Related tasks
Adding Meeting Blocklists
Configuring NAT
You can use H.323 protocol to make private-to-public calls after you configure the port forwarding and
enable the static NAT feature. If you want to use SIP protocol to make private-to-public calls, you also need
to enable the static NAT settings for the SIP protocol.
Procedure
1. Do one of the following:
• On your web user interface, go to Network > NAT/Firewall > NAT Configuration.
• On your VCS: go to More > Settings > Network Setting > Wired Network > NAT/Firewall > NAT.
For VP59, tap > Settings > Network Setting > Wired Network > NAT/Firewall > NAT.
•
On your CTP20/CTP18 , tap > Settings > Network Setting > Host Network > NAT/Firewall >
NAT.

Table of Contents

Other manuals for Yealink CTP18

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink CTP18 and is the answer not in the manual?

Yealink CTP18 Specifications

General IconGeneral
Aspect ratio16:10
Display diagonal8 \
Display resolution1280 x 800 pixels
Touchscreen technologyCapacitive
Built-in speaker(s)No
Ethernet LANYes
Mounting typeWall/Tabletop
Product colorBlack, Grey
RJ-45 ports quantity1
Cables includedLAN (RJ-45)
Power source typeDC
Power consumption (typical)7 W
Weight and Dimensions IconWeight and Dimensions
Depth100 mm
Width202 mm
Height151 mm

Related product manuals