Yealink CTP18 Administrator's Guide

| Configuring Network Settings | 77
Parameter Description Configuration Method
Password/AP Password
Configure the password of the
wireless AP.
Note: only when the security
mode is WPA2-PSK do you need
to configure this parameter.
Web user interface
Endpoint
CTP20/CTP18
Network Sharing
Enable or disable the system to
share its wired network to the
connected devices.
• On—The connected
devices can use an Internet
connection.
• Off—The connected devices
cannot use an Internet
connection.
Default: Disabled.
Web user interface
Frequency
Configure the frequency of the
wireless AP.
• 2.4G
• 5G
Default: 5G.
Web user interface
Endpoint
CTP20
Channel
Configure the channel of the
wireless AP.
Default: Auto.
Web user interface
Endpoint
CTP20/CTP18
Time
(it is feature is not applicable to
VP59)
Configure the default time for
optimizing the AP channel.
• 00:00~23:00—you can select
the desired hour from 00:00
to 23:00.
Default: Disabled.
• Optimize Wireless AP—
click this item and it will take
effect automatically at the
time you set.
Web user interface

Yealink CTP18 Specifications

General

Aspect ratio	16:10
Display diagonal	8 \
Display resolution	1280 x 800 pixels
Touchscreen technology	Capacitive
Built-in speaker(s)	No
Ethernet LAN	Yes
Mounting type	Wall/Tabletop
Product color	Black, Grey
RJ-45 ports quantity	1
Cables included	LAN (RJ-45)
Power source type	DC
Power consumption (typical)	7 W

Weight and Dimensions

Depth	100 mm
Width	202 mm
Height	151 mm