Yealink CTP18 - CTP18 Connection; Pair the CTP18 with endpoint; Method 3. Connect the CTP18 with endpoint Wirelessly

4. Unbind MeetingBoard and CTP184. Unbind MeetingBoard and CTP18
Unbinding is divided into system-level unbinding and Teams unbinding. If you want to repair this CTP18 with
another MeetingBoard, you need to do the system-level unbinding.
System-Level Unbinding:System-Level Unbinding:
1. On the right side of the CTP18 screen, tap > SettingsSettings > SystemSystem (Default admin password: 0000) > UnbindUnbind to
unpair with MeetingBoard.
 NOTENOTE
If the CTP18 is unresponsive, it is necessary to check whether Enable touchscreen controlsEnable touchscreen controls has been enabled.
CTP18 Touch Panel
5