Yealink MeetingBar A20/A30 Setup Guide
36
Procedure
1. Do one of the following:
– On the WPP20, press the presentation button to share the full
screen of the PC.
– On the WPP20, long press the presentation button for 3 seconds
and then release this button. Select the file or window you want to
share and then click Start Sharing.
– On the Yealink Wireless Presentation Pod software, click Contents
Share, select the file you want to share, and then click Start
Sharing.
The computer content is automatically projected to the device.
4.7 Wired BYOD
BYOD stands for bring your own device. After entering BYOD mode, you can
take MeetingBar A20/A30 as the peripherals for meetings hold by third-party
apps. When holding a meeting on the PC, you can use the camera, speaker, and
microphone of MeetingBar A20/A30 and display the PC content on the screen
connected to MeetingBar A20/A30.
To Next Page
Loading...
