Yealink MeetingBar A20 - Image Quality Settings

To Next Page

To Previous Page

| Camera Settings | 25

Configuring the Exposure Settings

Procedure

1. Go to More > Settings > Device Settings > Exposure Settings.

2. Select the desired mode from the Exposure Mode field.

For MeetingBar A20:

• If you select Auto Exposure:

Select the desired value from the Exposure Compensation, Flicker, Gain Limit, Wide Dynamic

Range, Metering field respectively.

• If you select Manual Exposure:

Select the desired value from the Gain Limit, Wide Dynamic Range, Shutter field respectively.

• If you select Shutter Priority:

Select the desired value from the Exposure Compensation, Gain Limit, Wide Dynamic Range,

Metering, Shutter field respectively.

• If you select Brightness Priority:

Select the desired value from the Flicker, Wide Dynamic Range, Metering, Brightness field

respectively.

For MeetingBar A30:

• If you select Auto Exposure:

Select the desired value from the Flicker field respectively.

• If you select Manual Exposure:

Select the desired value from the Shutter, Brightness field respectively.

• If you select Shutter Priority:

Select the desired value from the Shutter field respectively.

• If you select Brightness Priority:

Select the desired value from the Brightness field respectively.

Configuring the White Balance Setting

Procedure

1. Go to More > Settings > Device Settings > White Balance Setting.

Other manuals for Yealink MeetingBar A20