| Getting Started | 6
Rear Panel of MeetingBar A20
No. Port Name Description
1 Reset Key Reset the MeetingBar A20 device to factory defaults.
2 DC48V Connect to the power source via a power adapter.
3 HDMI Connect to a monitor for video images output.
4 VC Hub/
Phone
Coming soon:
• If you want to use wired sharing to present, connect this port to the PoE port
on the VCH51 video conferencing hub.
• Connect to VCM34/VCM38.
• Connect to MSpeaker
Ⅱ.
5 Internet Connect to the network device.
6 Security Slot Allow you to connect a universal security cable to the device, so you can lock
the device down. The device cannot be removed when locked.
7 USB Allow you to connect the USB accessories.
Hardware of MeetingBar A30
• Front Panel of MeetingBar A30
• Rear Panel of MeetingBar A30
To Next Page
Loading...
