| Getting Started | 8
Rear Panel of MeetingBar A30
No. Port Name Description
1 Reset Key Reset the MeetingBar A30 device to factory defaults.
2 DC48V Connect to the power source via a power adapter.
3 VC Hub/Phone Coming soon:
• If you want to use wired sharing to present, connect this port to
the PoE port on the VCH51 video conferencing hub.
• Connect to VCM34/VCM38.
• Connect to MSpeaker
Ⅱ.
4 Line Out/Line in Connect to an audio output/input device via an audio cable
(3.5mm).
5 HDMI Connect to a monitor for video images output.
6 Internet Connect to the network device.
7 Security Slot Allow you to connect a universal security cable to the device, so
you can lock the device down. The device cannot be removed when
locked.
8 USB Allow you to connect the USB accessories.
To Next Page
Loading...
