Yealink MeetingBoard 86 - Locking the Scroll Wheels; Installing the Floor Stand Beam

2
Lock the scroll wheels
1
Install the oor stand beam on the back of the oor stand
2
1. Put the left and right legs as shown in the gure above to avoid
installing it oppositely.
2. Install the beam to the back of the oor stand.
（
M6×12mm
）
Rubber cap
X 4
X 4
* Pay attention to the size of the
positioning column, do not insert it
oppositely.
1
2
BACK BACK
BACKBACK
BACK BACK
BACKBACK
√√
××