Yealink MeetingBoard 86 - Optional Component Installation; Install Windows OPS; Install MB-CAM

3
1. The endpoint has a built-in Android OS and supports installing
OPS modules to use both Windows and Android OS.
2. Windows OPS is optional. If you have not purchased, skip this
step.
3. When installing or uninstalling OPS, make sure that the end-
point is powered off. Otherwise, OPS may be abnormal.
MB-CAM is optional. If you have not purchased, skip this step.
Install Windows OPS (Optional)
3
Remove the OPS cover
Insert the OPS and tighten
the screws
1
2
3
4
Install MB-CAM (Optional)
4
Remove the top cover of the endpoint
Insert camera
Mount screws
1
2
3
4