Yealink MTouch Plus - Presentation Features; Pairing with Room Sensor; Wired Presentation Setup

8
Presentation
PC
Connect MTouch plus and PC through USB Type-C, and you can share the screen.
• Wired presentation
Pair with a Room Senor
1.Switch account from Skype to Admin.
2.Open Yealink RoomConnect Software from Desktop.
3.Go to MTouch Plus > Sensor.
4.Add sensor. Select the right sensor to pair.
Remove the back cover of Room Sensor, you will
see its name on the top. Then select accordingly.
Room Senor
Remember to install the battery of Room sensor before pairing.
USB Type-C Cable
(with an HDMI adapter)
EN