9
• Wireless presentation
You can use Yealink WPP30 wireless presentation pod for wireless content sharing.
1.Connect the WPP30 to the USB-A port of the MTouch
Plus. When pairing, the LED indicator of WPP30 is
orange. And the pairing is successful, the LED indicator
turns green breathing light.
2.Connect the paired WPP30 to the USB-A/USB-C port
on your computer. Wait Yealink Wireless Presentation
Pod software pops up.
3.On the WPP30, press the presentation button to share
full screen.
Press the presentation button again to stop sharing.
Yealink Wireless
Presentation Pod software
EN
LED indicator
To Next Page
Loading...
