Yealink MVC800 User Manual

Resetting UVC80/UVC50/UVC30 Room Camera to Home Position
1. Tap to enter the Camera Control page.
2. Tap
Reset .
Procedure
Controlling UVC80/UVC50/UVC30 Room Camera Position
1. Tap to enter the Camera Control page.
2. Tap or to zoom camera in/out.
3. Tap / / / to pan/tilt the camera.
Procedure
If the auto-framing feature is enabled, you can not control the UVC30 Room camera.
Enabling/Disabling Auto-framing for UVC30 Room Camera
1. Tap to enter the Camera Control page.
2. Select .
3. Enable/Disable the Auto-framing.
Procedure
7

Yealink MVC800 Specifications

General

Brand	Yealink
Model	MVC800
Category	Conference System
Language	English