EasyManuals Logo

Yealink SIP-T19P E2 User Manual

Yealink SIP-T19P E2
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Recovery Mode on Yealink IP phones
12
For W52P/W56P/W60B Base
For the W52P/W56P/W60B base, there is no screen to show information for you. The W52P/W56P/W60B
base uses 192.168.0.100 as its default IP address, so you need to configure a static IP address for your
local PC where you have the TFTP server installed.
Procedures
1. Configure the static IP address on your local PC.
It must be configured as below:
2. Click OK twice to save the settings.
3. Long press (for W52P/W56P base) or (for W60B base) and reconnect the power adapter
to trigger the recovery mode. Do not release (for W52P/W56P base) or (for W60B base)
until three LED indicators ( -> -> in turn) are all turned on.
The W52P/W56P/W60B base will download and upgrade the firmware from the TFTP server.
You can view the syslog of the TFTP server to check if the W52P/W56P/W60B base downloads the
firmware successfully as shown below:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T19P E2 and is the answer not in the manual?

Yealink SIP-T19P E2 Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Volume controlDigital
Integrated voicemailYes
Keypad number of keys29
Number of function keys6
Number of programmable keys7
Cables includedAC, DC, LAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.711, G.722, G.726, G.729B
Input current0.25 A
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.25 W
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts-
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Display diagonal2.3 \
Display resolution132 x 64 pixels
Security algorithmsHTTPS, MD5, SRTP
Networking standardsIEEE 802.1p, IEEE 802.1x
Ethernet LAN (RJ-45) ports2
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth143 mm
Width185 mm
Height38 mm
Package depth200 mm
Package width215 mm
Package height121 mm
Package weight996 g

Related product manuals