EasyManua.ls Logo

Yealink SIP-T2

Yealink SIP-T2
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Phone Customization
250
Description
It enables or disables the power LED indicator to flash when the phone receives an incoming call.
Permitted
Values
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator fast flashes (0.3s) red)
For T19(P) E2 phones:
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator fast flashes (0.3s) yellow)
Default
1
Supported
Devices
All phones except CP920
Web UI
Features > Power LED > Ringing Power Light Flash
Parameter
phone_setting.mail_power_led_flash_enable <y0000000000xx>.cfg
Description
It enables or disables the power LED indicator to flash when the phone receives a voice mail or a text
message.
Note: It works only if “account.X.display_mwi.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator slowly flashes (1s) red)
2-Enabled (if there are unread voice mails or text messages, the power LED indicator slowly flashes
(1s) red) even when the phone is busy, but value set by "phone_setting.talk_and_dial_power_led_
enable" has a higher priority.)
For T19(P) E2 phones:
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator slowly flashes (1s) yellow)
2-Enabled (if there are unread voice mails or text messages, the power LED indicator slowly flashes
(1s) yellow even when the phone is busy, but value set by "phone_setting.talk_and_dial_power_led_
enable" has a higher priority.)
Default
1
Supported
Devices
All phones except CP920
Web UI
Features > Power LED > Voice/Text Mail Power Light Flash
Parameter
phone_setting.mute_power_led_flash_enable <y0000000000xx>.cfg
Description
It enables or disables the power LED indicator to flash when a call is muted.
Permitted
Values
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator fast flashes (0.3s) red)
For T19(P) E2 phones:
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator fast flashes (0.3s) yellow)
Default
0
Supported
Devices
All phones except CP920

Table of Contents

Related product manuals