EasyManuals Logo

Yealink SIP-T20P Quick Start Guide

Yealink SIP-T20P
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Semi-Attended Transfer
Attended Transfer
Call Conference
Call Forward
Blind Transfer
Call Transfer
Speed Dial
To configure a speed dial key:
To use the speed dial key:
If there is more than one call on hold, press or to select the desired call, and then press .
You can transfer a call in the following ways:
1. Press during a call. The call is placed on hold.
1. Press during a call. The call is placed on hold.
1. Press during a call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press .
3. Press when the second party answers.
To enable call forward:
Always Forward ---- Incoming calls are forwarded unconditionally.
Busy Forward---- Incoming calls are forwarded if the phone is busy.
No Answer Forward ---- Incoming calls are forwarded if not answered after a period time.
1. Press when the phone is idle, and then select Features->Call Forward.
2. Select the desired forward type:
3. Enter the number you want to forward to. For No Answer Forward, press or to select the desired ring time
to wait before forwarding from the After Ring Time field.
4. Press to accept the change.
1. Press during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press .
4. Press the Cancel soft key to disconnect all parties.
1. Press when the phone is idle, and then select Features->DSS Keys.
2. Select the desired line key, and then press .
4. Press to accept the change.
Press the speed dial key to dial out the preset number.
3. Select Speed Dial from the Type field, select the desired line from the Account ID field, and enter the number in the
Value field.
3. Press again when the second party answers. All parties are now joined in the conference.
2. Enter the number you want to transfer to, and then press .
3. Press when you hear the ring-back tone.
3. Press .
2. Enter the number you want to transfer to.
5

Other manuals for Yealink SIP-T20P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T20P and is the answer not in the manual?

Yealink SIP-T20P Specifications

General IconGeneral
Keypad number of keys31
SpeakerphoneYes
Voice codecsG.711, G.722, G.723.1, G.726
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Touchscreen-
Lines quantity2 lines
Phonebook capacity1000 entries
Number of VoIP accounts2
BluetoothNo
Security algorithmsHTTPS, SSL/TLS
AC adapter input voltage100 - 240 V
AC adapter output voltage5 V
Power consumption (typical)2.6 W
Operating relative humidity (H-H)10 - 95 %
Compliance industry standardsIEEE 802.3af
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width185 mm
Height90 mm
Weight770 g

Related product manuals