For SIP-T29G/T27P/T27G IP phones:
When Y= 1, 21, the default value is 37 (Switch).
When Y = 2 to 20, 22 to 40, the default value is 0 (NA).
Note: To configure a Custom Key, make sure the value of the parameter
“features.enhanced_dss_keys.enable” is set to 1 (Enabled) in advance.
Description:
It configures the action or function for the DSS key.
This value uses the same macro action string syntax as an Enhanced DSS Key. For a list
of actions, refer to Understanding Macro Action.
You can also invoke the EDK macro. The macro name follows the character “!”. e.g.,
linekey.1.value = !IVR1; IVR1 stands for the macro name. For more information, refer to
Defining an EDK Macro.
For line keys:
X ranges from 1 to 29 (for SIP-T48G/S)
X ranges from 1 to 27 (for SIP-T54S/T46G/T46S/T29G)
X ranges from 1 to 15 (for SIP-T42G/T42S/T41P/T41S)
X ranges from 1 to 21 (for SIP-T52S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
For programmable keys:
X=1-10, 12-14, 17-18 (for SIP-T54S/T48G/T48S/T46G/T46S)
X=1-10, 13, 17-18 (for SIP-T52S/T42G/T42S/T41P/T41S/T40P/T40G)
X=1-14, 17-18 (for SIP-T29G/T27P/T27G)
X=1-10, 14, 17-18 (for SIP-T23P/T23G/T21(P) E2)
X=1-9, 13, 14, 17-18 (for SIP-T19(P) E2)
X=1-6, 9, 13 (for CP860)
For ext keys:
For SIP-T54S/T52S IP phones:
X ranges from 1 to 3, Y ranges from 1 to 60.
For SIP-T48G/T48S/T46G/T46S:
X ranges from 1 to 6, Y ranges from 1 to 40.
For SIP-T29G/T27P/T27G:
To Next Page
Loading...
