15．Enabled encryption/decryption password
Instruction: The function enables user to encrypt or decrypt the password. When setting
EnLock = 0, password is saved to phone as cleartext. And EnLock = 1, password is saved as
ciphertext. Default setting of neutral firmware is EnLock = 1, to enhance password security.
16．Direct conference function
Path: Webpage Phone DSS Key/EXT key
Instruction: When setting DSS Key Type as Conference, Value textbox is editable. Press
DSS Key and conference to the third party during a conversation, the third party will enter
conference directly when answering the phone. In idle status the key works as speed dial.
Detail: Please refer to V61 User Manual for details.
17．Username and Password stays in the same interface
Instruction: When setting DSS Key Type as ACD, pressing the DSS key to enter ACD login
interface. Username and password input textbox stays in the same interface.
18．Transfer cancel configuration
Instruction: During a conversation, press Transfer and Cancel key, the phone will return to
previous conversation interface. It’s unnecessary to press Resume. The function is
configurable, default setting of neutral firmware is disabled.
19．Enter the FWD configuration page when pressing FWD key.
Instruction: Pressing “TRAN” hardkey or DSS key(Forward) will enter the FWD
configuration page on the LCD screen, regardless of FWD status is enabled or disabled. And
you can configure Always/Busy/No Answer forward directly as you want. The function is
configurable, default setting of neutral firmware is disabled.
20．The DND, Forward, Anonymous Code will only be sent when the status changed.
Instruction: The DND、Forward、Anonymous code will only be sent when the status
changed. The code will not be sent when the phone power-on.
21．Added “BLFListBargeInCode” configuration
Path: Webpage Account Advanced BLFListBargeInCode
To Next Page
Loading...
