10． Added “Handset Send Volume” and “Handfree Send Volume” configuration
Path: Webpage Phone Features Handset Send Volume/Handfree Send Volume
Instruction: These two configuration items enable user to configure the sending volume of
handset and handfree mode.
11． Added “SendPoundKey” configuration
Path: Webpage Phone Features SendPoundKey
Instruction: If enable “SendPoundKey”, and select “#” as send key, “##” can be send out.
12． Added “AutoAnswerDelay” configuration
Path: Webpage Phone Features AutoAnswerDelay
Instruction: The function enables user to configure auto answer delay (range from 1~4s).
Default setting is 1s.
13．Added “DHCP Option Value” configuration
Path: Webpage Upgrade Advanced DHCP Option Value
Instruction: The function enables user to configure DHCP option value, and DHCP server
can identify the phone type. Default setting is yealink.
Detail: Please refer to V61 User Manual for details.
14．Auto configuration of first account
Instruction: The User name and Register name of the first account will be auto configuration
when the phone is upgraded or reset to factory default. This feature is disabled by default.
Form: z9hG4bK+local phone MAC, no spaces in between. If MAC address is
001565113068, then User name and Register name are both z9hG4bK001565113068.
To Next Page
Loading...
Need help?
General