Yealink SIP- T28P User Manual

Basic Call Features
103
4. Enter the directed call pickup code in the Directed Call Pickup Code field.
5. Click Confirm to accept the change.
To pick up a call directly:
1. Pick up the handset and press the more soft key.
The DPickup soft key appears on the LCD screen.
2. Press the DPickup soft key on your phone when the target phone receives an
incoming call.
3. Enter the phone number which is receiving an incoming call.
4. Press the DPickup soft key again.
The call is answered on your phone.
You can also configure a DSS key as a directed pickup key via phone user interface or
web user interface. Once configured, you can pick up a call by pressing the directed
pickup key directly.
Note
If a pickup code is already configured on a global or a per-line basis, you should not
configure the pickup code when configuring a DSS key to be pickup key.

Yealink SIP- T28P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	48
Voice codecs	G.711, G.722, G.723.1, G.726
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Display resolution	320 x 160 pixels
Lines quantity	- lines
Phonebook capacity	- entries
Number of VoIP accounts	6
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g