User Guide for the SIP-T28P IP Phone
66
2. Enter the string in the Prefix field.
3. Enter the string in the Replace field.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Add to add the replace rule.
When you enter the number “1” using the keypad and then press the Send soft key,
the phone will dial out “1234” instead.
Note
To edit a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select the desired replace rule by checking the check box.
3. Edit the values in the Prefix and Replace fields.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Edit to accept the change.
To delete one or more replace rules via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select the one or more replace rules by checking the check box(es).
3. Click Del to delete the replace rule(s).
Note
The valid values for the Account field can be one or more digits among 1, 2, 3, 4, 5 and 6.
Each digit must be separated by a comma. For example, when you enter the value “1, 2”
in the Account field, this replace rule will apply to account1 and account2.
If you leave the Account field blank or enter 0, the replace rule will apply to all accounts.
Replace rule is configurable via web user interface only.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
