Using Call Recording Feature on Yealink SIP-T2XP Phones
3
Receiving such a message, the certain supporting server will know to stop recording.
3. Recording triggered by HTTP URL
3.1 Configurations on the phone
(1) Via web management through page Phone -> DSS Key. Set any DSS Key by selecting the Type as
URL Record and assigning the Expansion with a certain URL. This is tested with Epygi PBX and the URL
for this PBX is http://10.1.2.224/phonerecording.cgi?model=yealink where IP 10.1.2.224 indicates the
SIP server address. As shown below:
To Next Page
Loading...
