Yealink Auto provisioning User Guide
6
network.dchp.end_ip = 10.0.0.100
#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled (default)
auto_provision.pnp_enable = 1
#Configure the domain name of the PNP server.
auto_provision.pnp_domain_name =
#Configure the value (manufacturer of the device) of the PNP subscribe message.
auto_provision.pnp_event_vendor =
#Configure the auto provision mode;
#0-Disabled (default), 1-Power on, 4-Repeatedly, 5-Weekly, 6-Power on + Repeatedly,
7-Power on + Weekly;
auto_provision.mode = 1
#Configure the interval (in minutes) for the phone to check new configuration files. It
ranges from 1 to 43200, the default value is 1440.
#It is only applicable to "Repeatedly" and "Power on + Repeatedly" modes.
auto_provision.schedule.periodic_minute = 1440
#Configure the start time of the day for the phone to check new configuration files. The
default value is 00:00.
#It is only applicable to "Weekly" and "Power on + Weekly" modes.
#If the desired start time of the day is seven forty-five a.m., the value format is 07:45.
auto_provision.schedule.time_from = 00:00
#Configure the end time of the day for the phone to check new configuration files. The
default time is 00:00.
#It is only applicable to "Weekly" and "Power on + Weekly" modes.
#If the desired end time of the day is seven forty-five p.m., the value format is 19:45.
auto_provision.schedule.time_to = 00:00
#Configure the day of week for the phone to check new configuration files. The default
vaule is 0123456.
#0-Sunday,1-Monday,2-Tuesday,3-Wednesday,4-Thursday,5-Friday,6-Saturday;
#It is only applicable to "Weekly" and "Power on + Weekly" modes.
#If the desired week is Monday, Tuesday and Wednesday, the value format is 012.
auto_provision.schedule.dayofweek = 0123456
#Configure the URL of the auto provisioning server.
auto_provision.server.url =
#Configure the username and password for downloading.
To Next Page
Loading...
