Configuring a TFTP Server
21
Yealink IP Phones support using the FTP, TFTP, HTTP and HTTPS protocols to download the
configuration files. TFTP server is used by default. You can use any protocol for
provisioning. The following section takes the TFTP server as an example.
We recommend that you can use 3CDaemon or TFTPD32 tool as a TFTP server.
3CDaemo and TFTPD32 are free applications for Windows. You can download the
3CDaemon software at: http://www.oldversion.com/3Com-Daemon.html and TFTPD32 at:
http://tftpd32.jounin.net/.
We provide a simple instruction of configuring a FTP server using 3CDaemon tool in the
Configuring a FTP server section.
To prepare a root directory:
1. Create a root TFTP directory on the local computer.
2. Place the configuration files to this root directory.
3. Set the security permissions for the TFTP directory folder.
4. You need to define a user or a group name, and set the permissions: read, write,
and modify files. Security permissions vary by organization.
An example of using the Windows platform is shown as below:
To Next Page
Loading...
Need help?
General