Yealink SIP-T2XP - Page 16

Yealink Auto provisioning User Guide
10
account.3.user_name =
#Configure the SIP server address and port (5060 by default)
account.3.sip_server_host =
account.3.sip_server_port = 5060
#Line4 settings (For SIP-T28P, SIP-T38G and VP530 IP phones only)
#Enable or disable the account4, 0-Disabled (Default), 1-Enabled
account.4.enable =
#Configure the label displayed on the LCD screen for account4
account.4.label =
#Configure the display name of account4
account.4.display_name =
#Configure the user name and password for register authentication
account.4.auth_name =
account.4.password =
#Configure the register user name
account.4.user_name =
#Configure the SIP server address and port (5060 by default)
account.4.sip_server_host =
account.4.sip_server_port = 5060
#Line5 settings (For SIP-T28P and SIP-T38G IP phones only)
#Enable or disable the account5, 0-Disabled (Default) 1-Enabled
account.5.enable =
# Configure the label displayed on the LCD screen for account5
account.5.label =
#Configure the display name of account5
account.5.display_name =
#Configure the user name and password for register authentication
account.5.auth_name =
account.5.password =
#Configure the register user name
account.5.user_name =
#Configure the SIP server address and port (5060 by default)
account.5.sip_server_host =
account.5.sip_server_port = 5060
#Line6 settings (For SIP- T28P and SIP-T38G IP phones only)
#Enable or disable the account6, 0-Disabled (Default), 1-Enabled