EasyManuals Logo

Yealink SIP-T2XP User Manual

Yealink SIP-T2XP
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Getting Started
15
Yealink IP phones allow you to batch upload contact data by auto provisioning. You can
create multiple contacts using the supplied template local contact file.
When editing the template local contact file, remember the following:
<contactData> indicates the start of a contact file and </contactData> indicates
the end of a contact file (Applicable to SIP-T2xP/T3xG IP phones).
Add groups between <groupinfo> and </groupinfo> (applicable to SIP-T2xP/T3xG
IP phones).
Add groups between <root_group> and </ root_group> (Applicable to VP530 IP
phones).
Add local contacts between <group> and </group> (Applicable to SIP-T2xP/T3xG
IP phones).
Add local contacts between <root_contact> and </ root_contact> (Applicable to
VP530 IP phones).
Add contacts to the blacklist between <blacklist> and </blacklist> (Applicable to
SIP-T2xP/T3xG IP phones).
When specifying the desired line for the contact, the valid values are 0 and line ID,
0 stands for Auto.
When specifying a ring tone for the contact or the group, the valid values are Auto,
Resource:RingN.wav (for the default system ring tone) and Custom:Name.wav (For
the customized ring tone).
To customize a local contact file:
1. Open the template file using an ASCII editor.
2. For each contact that you wish to add, add the following string to the file, each
starting on a separate line:
<contact sDisplayName="" sOfficeNumber="" sMobilNumber="" sOtherNumber=""
sLine="" sRing="" group=""/>
#(For T2xP IP phones)
<contact sDisplayName="" sOfficeNumber="" sMobilNumber="" sOtherNumber=""
sLine="" sRing="" group="" photoDefault=”” photoSelect=””/>
#(For T3xG IP
phones)
<contact display_name="" office_number="" mobile_number="" other_number=""
line="" ring="" group_id_name="" default_photo="" selected_photo=""/>
#(For
VP530 IP phones, entering blacklist in the group_id_name =””“field to add the
contacts to blacklist)
Where:
sDisplayName=””/display_name=”” specifies the name of the contact (This value
cannot be blank or duplicated).
OfficeNumber=””/office_number=”” specifies the office number of the contact.

Other manuals for Yealink SIP-T2XP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T2XP and is the answer not in the manual?

Yealink SIP-T2XP Specifications

General IconGeneral
BrandYealink
ModelSIP-T2XP
CategoryIP Phone
LanguageEnglish

Related product manuals