Customizing Your Phone
Voice Message
Contact Directory
Ring Tones
Volume Adjustment
To add a contact:
To edit a contact:
Quick Reference Guide
www.yealink.com
Call History
Note: You can add contacts from the call history easily. For more information, refer to Call History above.
To delete a contact:
To listen to voice messages:
Press the Send soft key to place a call.
Select Detail to view detailed information about the entry.
Select Add to Contacts to add the entry to the local directory.
Select Add to Blacklist to add the entry to the blacklist.
Select Delete All to delete all entries from the list.
Press during a call to adjust the receiver volume of the handset/speakerphone/
headset.
Press when the phone is idle to adjust the ringer volume.
Press the Delete soft key to delete the entry from the list.
Message waiting indicator on the idle screen indicates that one or more voice messages are waiting
at the message center. The power indicator LED slowly flashes red.
1. Press or the Connect soft key.
2. Follow the voice prompts to listen to your voice messages.
1. Press the History soft key when the phone is idle, press or to scroll through the list.
2. Select an entry from the list, you can do the following:
If you press the Option soft key, you can also do the following:
1. Press the Directory soft key when the phone is idle, and then select the desired group.
2. Press the Add soft key to add a contact.
1. Press the Directory soft key when the phone is idle, and then select the desired group.
1. Press the Directory soft key when the phone is idle, and then select the desired group.
3. Press the OK soft key when the LCD screen prompts “Delete Selected Item?”.
1. Press the Menu soft key when the phone is idle, and then select Settings->Basic Settings->
Ring Tones.
2. Press or to select the desired ring tone.
3. Press the Save soft key to accept the change.
3. Edit the contact information.
4. Press the Save soft key to accept the change.
4. Press the Add soft key to accept the change.
3. Enter a unique contact name in the Name field and contact numbers in the corresponding fields.
2. Press or to select the desired contact, press the Option soft key and then select Detail
from the prompt list.
2. Press or to select the desired contact, press the Option soft key and then select Delete
from the prompt list.
For more information, refer to the User Guide available online:
http://www.yealink.com/SupportDownloadfiles_detail.aspx?CateId=313&flag=142
Applies to firmware version 72.1 or later.
SIP-T41P
Ultra-elegant IP Phone
(V72.4)
Copyright 2014 YEALINK NETWORK TECHNOLOGY CO.,LTD.
c
To Next Page
Need help?
General
Weight and Dimensions
