EasyManuals Logo

Yealink SIP-T48S Quick Start Guide

Yealink SIP-T48S
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Call History
1. When the phone is idle, tap , and then tap the desired call list on the left.
2. Tap or , or press or to scroll to the desired page.
3. Tap after the desired entry, and then you can do the following:
Tap Send to call the entry.
Tap Add to add the entry to the local directory.
Tap Edit to edit the phone number of the entry before placing a call.
Tap Blacklist to add the entry to the blacklist.
Tap Delete to delete the entry from the list.
Contact Directory
To add a contact:
1. When the phone is idle, tap , and then tap All Contacts on the left.
2. Tap Add to add a contact.
3. Enter a unique contact name in the Name field and ontact numbers in the corresponding field .
4. Tap the Save soft key to accept the change.
To edit a contact:
1. When the phone is idle, tap , and then tap All Contacts on the left.
2. Tap after the desired contact.
3. Edit the contact information.
4. Tap the Save soft key to accept the change.
To delete a contact:
1. When the phone is idle, tap , and then tap All Contacts on the left.
2. Tap after the desired contact , and then tap Delete.
3. Tap OK when the touch screen prompts “Delete selected item?”.
Note: You can add contacts from call history easily. For more information, refer to Call History above.
Volume Adjustment
Press during a call to adjust the receiver volume of the handset/speakerphone/headset.
Customizing Your Phone
Call Conference
1. Tap the Conference soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then tap Conference.
3. Tap the Conference soft key again when the second party answers. All parties are now joined in the conference.
4. Tap the EndCall soft key to disconnect all parties.
Note: You can split the conference call into two individual calls by tapping the Split soft key.
Voice Message
Message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message center. The power
indicator LED slowly flashes ed.
To listen to voice messages:
1. Tap and then tap Connect, or press .
2. Follow the voice prompts to listen to your voice messages.
Customizing Your Phone
ENGLISH
Note: You can add contacts from call history easily. For more information, refer to Call History above.
ENGLISH
6
Press when the phone is idle or ringing to adjust the ringer volume.
Press to adjust the media volume in the corresponding screen.

Other manuals for Yealink SIP-T48S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48S and is the answer not in the manual?

Yealink SIP-T48S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Display diagonal7 \
Display resolution800 x 480 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Front cameraNo
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Keypad number of keys42
Security algorithmsAES
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, HTTPS
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth225 mm
Width266 mm
Height185 mm
Package depth263 mm
Package width324 mm
Package height128 mm

Related product manuals