Name: Yealink SIP-T53
Brand: Yealink
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Recovery Mode on Yealink IP phones

4. After a handset is registered, press (for W52P/W56P base) or (for W60B base) on the

handset to verify the current firmware version.

For W80DM/W80B

For the W80DM/W80B, there is no screen to show information for you. The W80DM/W80B uses

192.168.0.23 as its default IP address, so you need to configure a static IP address for your local PC

where you have the TFTP server installed.

Procedures:

1. Configure the static IP address on your local PC.

It must be configured as below:

2. Click OK twice to save the settings.

3. Long press and reconnect the power adapter to trigger the recovery mode.

The W80DM/W80B will download and upgrade the firmware from the TFTP server.

Other manuals for Yealink SIP-T53

Questions and Answers:

Need help?

Do you have a question about the Yealink SIP-T53 and is the answer not in the manual?

General