Yealink SIP-T54W Getting Started

Recovery Mode on Yealink IP phones
12
4. After a handset is registered, press (for W52P/W56P base) or (for W60B base) on the
handset to verify the current firmware version.
For W80DM/W80B
For the W80DM/W80B, there is no screen to show information for you. The W80DM/W80B uses
192.168.0.23 as its default IP address, so you need to configure a static IP address for your local PC
where you have the TFTP server installed.
Procedures:
1. Configure the static IP address on your local PC.
It must be configured as below:
2. Click OK twice to save the settings.
3. Long press and reconnect the power adapter to trigger the recovery mode.
The W80DM/W80B will download and upgrade the firmware from the TFTP server.

Yealink SIP-T54W Specifications

General

Connectivity	Dual-port Gigabit Ethernet
SIP Accounts	16
Opus Codec Support	Yes
Audio Features	HD voice with Yealink Acoustic Shield technology
Expansion Module	Supports up to 3 EXP50 expansion modules
Power over Ethernet (PoE)	Yes
Headset Support	Yes, RJ9 headset port, USB headset support, Bluetooth headset support
Resolution	480 x 272 pixels
Bluetooth	Yes, Bluetooth 4.2
USB Ports	2 (USB 2.0)