Yealink T19P

Yealink IP Phones Auto provisioning Guide
202
Parameter
Permitted
Values
Descriptions
Web Setting Path
When Y=7, the default value is iLBC;
When Y=8, the default value is
G726-32.
account.X.cod
ec.Y.enable =
(SIP-T28P/T48G
/T46G: X
ranges from 1
to 6.
SIP-T26P/T22P/
T42G/T41P: X
ranges from 1
to 3.
SIP-T21P/T20P:
X ranges from
1 to 2.
SIP-T19P: X=1.
SIP-T28P/T26P/T
22P/T20P: Y
ranges from 1
to 11.
SIP-T21P/T19P:
Y ranges from
1 to 8.
SIP-T4X: Y
ranges from 1
to 12)
0 or 1
It enables or disables the specified
codec for account X.
0-Disabled
1-Enabled
Example:
account.1.codec.1.enable =1
This means that the codec PCMU is
enabled on the phone.
For SIP-T28P/T26P/T22P/T20P/T4X IP
phones:
When Y=1, the default value is 1;
When Y=2, the default value is 1;
When Y=3, the default value is 0;
When Y=4, the default value is 0;
When Y=5, the default value is 1;
When Y=6, the default value is 1;
When Y=7, the default value is 0;
When Y=8, the default value is 0;
When Y=9, the default value is 0;
When Y=10, the default value is 0;
When Y=11, the default value is 0.
When Y=12, the default value is 0 (only
applicable to SIP-T4X IP phones).
For SIP-T21P/T19P IP phones:
When Y=1, the default value is 1;
When Y=2, the default value is 1;
When Y=3, the default value is 0;
When Y=4, the default value is 0;
When Y=5, the default value is 1;
When Y=6, the default value is 1;
When Y=7, the default value is 0;
When Y=8, the default value is 0.
Account->Codec