Yealink T19P

Appendix
221
Parameter
Permitted
Values
Descriptions
Web Setting Path
_status_enabl
e =
(SIP-T28P/T48G
/T46G: X
ranges from 1
to 6.
SIP-T26P/T22P/
T42G/T41P: X
ranges from 1
to 3.
SIP-T21P/T20P:
X ranges from
1 to 2.
SIP-T19P: X=1.)
0-Disabled
1-Enabled
The default value is 0.
account.X.call
_center.queue
_status_light_e
nable =
(SIP-T28P/T48G
/T46G: X
ranges from 1
to 6.
SIP-T26P/T22P/
T42G/T41P: X
ranges from 1
to 3.
SIP-T21P/T20P:
X ranges from
1 to 2.
SIP-T19P: X=1.)
0 or 1
It enables or disables the power
indicator LED to flash when the ACD
call queue has reached the maximum
number of calls for account X.
0-Disabled (power indicator LED does
not flash)
1-Enabled (power indicator LED fast
flashes (300ms) green)
If it is set to 0, the status of the power
indicator LED is determined by the
value of the parameter
“phone_setting.common_power_led_e
nable”.
The default value is 0.
account.X.hot
eling.enable
=
(SIP-T28P/T48G
/T46G: X
ranges from 1
to 6.
SIP-T26P/T22P/
T42G/T41P: X
0 or 1
It enables or disables hoteling feature
for account X.
0-Disabled
1-Enabled
The default value is 0.
It takes effect after a reboot.