Yealink T19P

Getting Started
25
 When enabling or disabling the phone to search the desired directory list, the valid
values are 0 and 1. 0 stands for Disabled, 1 stands for Enabled.
To customize a super search template:
1. Open the template file using an ASCII editor.
2. For each directory list that you want to configure, edit the corresponding string in
the file. For example, you want to configure the local directory list, edit the
following strings:
<item id_name="local_directory_search" display_name="Local Directory"
priority="1" enable="1" />
Where:
id_name="" specifies the directory list (id_name = “local_directory_search”
specifies the local directory list). Do not edit this field.
display_name="" specifies the display name of the directory list. We recommend
you do not edit this field.
priority="" specifies the priority of search results.
enable="" enables or disables the phone to search the directory list.
3. Edit the values within double quotes.
4. Place this file to the provisioning server.
The following is an example of a super search template:
<root_super_search>
<item id_name="local_directory_search" display_name="Local Directory"
priority="1" enable="1" />
<item id_name="calllog_search" display_name="History" priority="2"
enable="1" />
<item id_name="remote_directory_search" display_name="Remote Phone
Book" priority="3" enable="0" />
<item id_name="ldap_search" display_name="LDAP" priority="4" enable="0" />
</root_super_search>
Yealink IP phones allow you to upgrade firmware manually via web user interface, or
upgrade firmware in batch via auto provisioning.
The following table lists the firmware name for each phone model (X is replaced by the
actual firmware version):
Phone Model
Firmware Name
SIP-T28P
2.x.x.x.rom