Yealink T29G Quick Reference Guide

Yealink T29G Quick Reference Guide : 2
PLACING A CALL
ANSWERING A CALL
Using the Handset
• Pick up the Handset
• Enter the number, then press Send soft key
Using the Speakerphone
• With the handset on-hook, press
• Enter the number, then press the Send soft key
Using the Headset
• With the headset connected, press
to activate the headset mode
• Enter the number, then press the Send soft key
Using the Handset
• Pick up the Handset
Using the Speakerphone
• Press the Speakerphone key.
Using the Headset
• Press the Headset key.
Note: During a call, you can alternate between the headset, hands-free speakerphone and
handset modes by pressing the HEADSET key, the Speakerphone key or by picking up the
handset. Headset mode requires a headset connected.
Note: You can reject an incoming call by pressing the Reject soft key.

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)