Yealink T29G Quick Reference Guide

Yealink T29G Quick Reference Guide : 6
CALL CONFERENCE
Call Conference
• Press the Conference key or the Conference soft key during an active call.
The call is placed on hold.
• Enter the number of the second party, and then press the Send soft key.
• Press the Conference key or the Conference soft key again when the second party
answers. All parties are now joined in the conference.
• Press the EndCall soft key to disconnect all parties.
CALL FORWARD
To enable call forward
• Press the
• Enter the number you want to forward to. For No Answer Forward, press or to
select the desired ring time to wait before forwarding from the After Ring Time field.
• Press the Save soft key to accept the change.
• Select the desired forward type:
Always Forward - Incoming calls are forwarded unconditionally.
Busy Forward - Incoming calls are forwarded when the phone is busy.
No Answer Forward - Incoming calls are forwarded if not answered after a period of time.
Menu soft key when the phone is idle and then Features > Call Forward
Note: You can split the conference call into two individual calls by pressing the Split soft key.

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)