QUICK USER GUIDE
YEALINK T46U
SMARTCITYMETRO.COM
BASIC CALL FEATURES
PLACING A CALL USING THE HANDSET
1. Pick up the handset.
2. Enter the number, and then press the Send soft key.
USING THE SPEAKERPHONE
1. With the handset on-hook, press .
2. Enter the number, and then press the Send soft key.
USING THE HEADSET
1. With the headset connected, press to activate the
headset mode.
2. Enter the number, and then press the Send soft key.
Note: During a call, you can alternate between the headset, hands-
free speakerphone and handset modes by pressing the HEADSET
key, the Speakerphone key or by picking up the handset. Headset
mode requires a connected headset.
ANSWERING A CALL USING THE HANDSET
Pick up the handset.
USING THE SPEAKERPHONE
Press .
USING THE HEADSET
Press .
Note: You can reject an incoming call by pressing the Reject soft key.
ENDING A CALL USING THE HANDSET
Hang up the handset or press the End Call soft key.
USING THE SPEAKERPHONE
Press or the End Call soft key.
USING THE HEADSET
Press the End Call soft key.
REDIAL
• Press to enter the placed call list, press or to select
the desired entry, and then press or the Send so key.
• Press twice when the phone is idle to dial out the last
dialed number.
CALL MUTE AND UN-MUTE
Press to mute the microphone during a call.
Press again to un-mute the call.
TO PLACE A CALL ON HOLD
Press the Hold soft key during an active call.
TO RESUME THE CALL, DO ONE OF THE FOLLOWING
• If there is only one call on hold, press the Resume soft key.
• If there is more than one call on hold, press or to
select the desired call, and then press or the Resume
soft key.
CALL TRANSFER
You can transfer a call in the following ways:
BLIND TRANSFER
1. Press or the Transfer soft key during an active call. The
call is placed on hold.
2. Enter the number you want to transfer to.
3. Press or the B Transfer soft key.
SEMI-ATTENDED TRANSFER
1. Press or the Transfer so key during an acve call. The
call is placed on hold.
2. Enter the number you want to transfer to, and then press the
Send so key.
3. Press or the Transfer so key when you hear the ring-
back tone.
To Next Page
Need help?
General
