Yealink T54W

17
Telephone settings
Automatic redialling
Suggests number (if necessary, remove function)
Ring tone
Define as primary device
Logoff
Queues
Queues can be enabled or disabled; for set-up see administration portal manual)
2.2. Function Keys & Codes
You can alter the configuration of the freely assignable function keys via
ncontrol.nfon.net under Configurations - Function Keys. Alteration is also possible via the
administration portal. Long names will be displayed in abbreviation.
Yealink T52S, T54S
You can save up to 12 (T52S) or 16 function keys (T54S) on three levels on your telephone.
Additional function keys can be configured via the EXP50 expansion module.
Yealink T41P, T42G, T46G
You can save up to 15 or 27 function keys (T46G) on three levels on your telephone.
Yealink T48G
You can alter and save up to 29 functions on your display. All keys will be displayed at once when
pressing the DSS key on your display. Further freely assignable function keys can be configured via
the extension module EXP40 (only available for T46G and T48G).