QUICK USER GUIDE
YEALINK T57W
SMARTCITYMETRO.COM
USING BASIC CALL FUNCTIONS
PLACING A CALL USING THE HANDSET
1. Pick up the handset.
2. Enter the number, and then tap Send.
USING THE SPEAKERPHONE
1. With the handset on-hook, press .
2. Enter the number, and then tap Send.
USING THE HEADSET
1. With the headset connected, press to activate the
headset mode.
2. Enter the number, and then tap Send.
Note: During a call, you can alternate between the headset, hands-
free speakerphone and handset modes by pressing the HEADSET
key, the Speakerphone key or by picking up the handset. Headset
mode requires a connected headset.
ANSWERING A CALL USING THE HANDSET
Pick up the handset.
USING THE SPEAKERPHONE
Press .
USING THE HEADSET
Press .
Note: You can reject an incoming call by pressing the Reject soft key.
ENDING A CALL USING THE HANDSET
Hang up the handset or tap End Call.
USING THE SPEAKERPHONE
Press or End Call.
USING THE HEADSET
Tap End Call.
REDIALING A CALL
• Press to enter the Placed Calls list, and then tap the
desired entry.
• Press twice when the phone is idle to dial out the last
dialed number.
MUTING AND UN-MUTING A CALL
Press to mute the microphone during a call.
Press again to un-mute the call.
TO HOLD A CALL
Press or Hold during an active call.
TO RESUME THE CALL, DO ONE OF THE FOLLOWING
• If there is only one call on hold, press or Resume.
• If there is more than one call on hold, select the desired
call, and then press or Resume.
To Next Page
