Yealink UVC40 - UVC40 Installation; Put on a Flat Surface

1
AAA Battery×2UVC 40
VCR20
Remote Control
Cable Tie×5
Quick Start Guide
We recommend that you use the accessories provided or approved by Yealink. The use of
unapproved third-party accessories may result in reduced performance.
Use the Yealink original power adapter (48V/0.7A) to charge the endpoint only. The use of the
third-party power adapter may cause the damage to the endpoint.
The USB cable in the MVC400/ZVC400 package is 2.5 meters long.
Mounting Bracket
and Accessories
Power Adapter
×4
×2
×2
Silicone Pad×2
Put on a Flat Surface
Package Contents
7m
USB Cable
TV TV
UVC40 Installation