Yealink VC500 - Page 6

Mount onto a TV Stand or a Tripod
Steps：
1
2
3
5
Remote Control Installation
Push the VESA accessory along the track.
Secure the VESA accessory to the endpoint using the M3×8 screws.
Align the location pillar at the location hole, and then secure the bracket to the VESA accessory using the 1/4”-20 UNC screw.
SN
MAC
Reset
SN
MAC
Reset
SN
MAC
Reset
Screw specification: M3×8
1
2
3
SN
MAC
Reset
Screw specification:
1/4”-20 UNC
SN
MAC
Reset
SN
MAC
Reset
SN
MAC
Reset
Screw specification: M3×8
SN
MAC
Reset
1
2
3
TV Stand
You need to purchase a TV stand or a tripod separately. The TV stand or tripod has the same requirements as the bracket used in the
ceiling-mounted installation method.
The installation steps are the same as the ceiling-mounted installation steps.
Screw specification:
1/4”-20 UNC
Cable Ties Installation