Yealink VC500 - Page 9

8
For more information on WPP20 wireless presentation pod, refer to Yealink WPP20 Wireless Presentation
Pod Quick Start Guide.
Wireless Sharing
WPP20
Wireless Presentation Pod
PC
VC Hub/Phone
HDMI 2
SN
MAC
Internet
HDMI 1
DC48V
Reset
WF50 Wi-Fi USB Dongle
If endpoint works with C package or D package, do the following:
Power Adapter
VC Hub/Phone
HDMI 2
SN
MAC
Internet
HDMI 1
DC48V
Reset
Display×2
1.8m
HDMI Cable
3m
Ethernet Cable
USB Dongle
a) The CPW90 wireless microphones and endpoint are automatically paired from the factory.
To use the CPW90 wireless microphones, connect the DD10 USB dongle to one of the USB ports on the endpoint, then the
CPW90 wireless microphones can work as the audio input devices.
b) The CPW90-BT bluetooth wireless microphones and endpoint are automatically paired from the factory.
To use the CPW90-BT bluetooth wireless microphones, connect the BT42 bluetooth USB dongle to one of the USB ports on the
endpoint, then the CPW90-BT bluetooth wireless microphones can work as the audio input devices.
The endpoint should be used with Yealink original power adapter (48V/0.7A) only. The use of the third-party power adapter may
cause the damage to the endpoint. The cable should be replaced at once if its skin is broken.
MINI DP HDMI
Codec
Audio
7.5m Ethernet Cable
PC
1.2m
Mini-DP Cable or
1.2m
HDMI Cable
A: For VCH50 video conferencing hub:
B: For VCH51 video conferencing hub:
Power Adapter
VC Hub/Phone
HDMI 2
SN
MAC
Internet
HDMI 1
DC48V
Reset
Display×2
1.8m
HDMI Cable
3m
Ethernet Cable
USB Dongle
HDMI
PC
0.6m
HDMI Cable
0.6m USB
Type-C Cable
or
PC
VCH51
PoE
7.5m
Ethernet Cable