Yealink W53H How To Configure

2/28/2019 Provisioning a Yealink DECT W52P/W56P with the 3CX v15
https://www.3cx.com/sip-phones/yealink-dect-w52p/ 1/4
How to configure Yealink W52P/H, W56P/H, W60P/B
for 3CX
This guide applies to v15 SP4 and higher.
On this topic
How to configure Yealink W52P/H, W56P/H, W60P/B for 3CX
Supported Models: Yealink DECT series and Handsets
Base Station
Handset Station
Step 1: Upgrade to the Required firmware
Step 2: Factory Reset the Yealink Dect system
Step 3: Provisioning a Yealink WP station
Remote STUN
SBC
Step 4: Registering the handset
Known Limitations
Supported Models: Yealink DECT series and Handsets
Base Station
● Yealink W52P
● Yealink W56P
● Yealink W60P/B
Handset Station
● Yealink W52H
● Yealink W53H

Yealink W53H Specifications

General

Headset Jack	3.5mm
DECT Standards	CAT-iq2.0
Operating Temperature	0°C to 40°C
Wireless	DECT
Display	1.8" 128x160 pixels color display
Range	Up to 300 meters in open space
Dimensions	150mm x 48mm x 25mm
Supported Codecs	G.726, G.722, G.711
Frequency Band	1.88 GHz to 1.90 GHz
Supported Protocols	SIP