Need help?Do you have a question about the Yealink W52 and is the answer not in the manual?
General| Resolution | 128 x 160 pixels |
|---|---|
| Handsets per base | Up to 5 |
| Technology | DECT |
| Range | Up to 300 meters outdoors, 50 meters indoors |
| Audio features | Full-duplex speakerphone |
| Power supply | AC 100-240V Input, DC 5V |
| Protocols | SIP |
| Audio Codecs | G.722 |
| Headset Jack | 3.5mm |
| Power Saving | Yes |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% |
| Frequency Bands | 1880-1900 MHz |
Instructions for connecting the base station using AC power or Power over Ethernet (PoE).
Procedures for registering handsets, selecting base stations, and managing connections.
Managing local directory, adding, editing, deleting contacts, and using the blacklist.
Methods for placing internal/external calls, answering calls via earpiece, speakerphone, or headset.
Features like call mute, hold/resume, call waiting, and DND activation.
Procedures for blind, attended transfers, and setting up local conference calls.
Configuring anonymous call rejection and managing voice mail messages.
Solutions for common problems like no ringing, not in range, registration failures, and network unavailability.
To Next Page
