Yealink W52 - Date and Time

User Guide for the W52 Cordless Phone
PHONE SETTINGS
28
Date and Time
Date and time are displayed on the idle screen of your handset. The handset obtains the date and time from the
Simple Network Time Protocol (SNTP) server by default. If your handset cannot obtain the date and time from the
SNTP server, you need to configure the date and time manually.
You can configure the time format and date format respectively. The handset supports two time formats (12 Hour
or 24 Hour) and seven date formats. The available date formats are listed in the following table:
Date Format Example(2014-5-28)
WWW MMM DD Wed. May 28
DD-MMM-YY 28-May-14
YYYY-MM-DD 2014-05-28
DD/MM/YYYY 28/05/2014
MM/DD/YY 05/28/14
DD MMM YYYY 28 May 2014
WWW DD MMM Wed. 28 May
To configure date and time manually via the handset:
1. Press to enter the main menu.
2. Select ->Date & Time.
3. Edit the current values in the Date and Time fields respectively.
4. Press the Save soft key to accept the change.
The date and time displayed on the LCD screen will change accordingly.
To configure the time forma via the handset:
1. Press to enter the main menu.
2. Select ->Display->Time Format.
3. Press or to highlight the desired time format.
4. Press the Change soft key.
The radio box of the highlighted time format is marked.
The time format displayed on the LCD screen will be changed accordingly.