Yealink W52 - Basic Operations; Handset Registration and Base Management

User Guide for the W52 Cordless Phone
BASIC OPERATIONS
17
BASIC OPERATIONS
This chapter provides you with the basic operating instructions of the W52 Cordless Phone. Topics include:
• Handset Registration
• Basic Network Settings
• Checking System Status
• Account Registration
• Turning Handset On/Off
• Adjusting Ringer Volume
• Locking/Unlocking Keypad
• Locating a Handset
• Switching Silent Mode On/Off
• Menu Guidance
If you require additional information or assistance with your new phone, contact your system administrator.
Handset Registration
You can register up to 5 handsets to one W52 Cordless Phone base station. Each handset can be registered to 4
different base stations.
About handset registration:
Your Yealink W52 Cordless Phones are pre-registered with the base station before they are shipped. There is no
need to register the handsets after receiving your first order of a base station and phone(s).
Ordering additional handsets:
When ordering additional handsets, your new handset will require manual registration with the base station.
Please follow the manual handset registration instructions below for each new handset.
Replacing base stations:
From time to time a base station may need to be replaced under the warranty. Your handsets can be registered
with up to 4 different base stations. Thus, you do not need to de-register your handsets before registering them
with the new base station. To register your handsets to the new base station, please follow the manual handset
registration instructions below for each handset.
Replacing handsets:
From time to time a handset may need to be replaced under the warranty. Before you can register your
replacement handset(s) with the base station, you must de-register the old handset(s) from the base station.
The process involves:
• From any functioning handset, follow the de-registration process below
• Select the handset number associated with the old extension(s) and press OK
• Repeat this process for each old handset
When complete, please follow the manual handset registration instructions below for each replacement handset.