Your base station
1
Press the paging key to make your handset ring when you can’t find it.
• Toggle through the registration mode.
• Reset the base station to its factory settings.
2
Check the base station’s mode with the registration LED.
• Fast green flashes = the station’s in paging mode.
• Slow green flashes = the station’s in registration mode.
• Steady green light = a handset is registered to the base station.
• No light = there’s no registered handsets.
3
Check your base station’s connected to the internet with the
network status LED.
• Slow green flashes = the station’s offline.
• Steady green light = the station’s connected to the internet.
4
Check power with the power indicator LED.
• Slow green flashes = the station’s upgrading its firmware.
• Steady green light = the station has power.
• No light = the station doesn’t have power.
2
3
4
1
13
To Next Page
Loading...
