Yealink W70B - Quick Start Manual

W70B Quick StartW70B Quick Start
Package ContentsPackage Contents
Assemble W70BAssemble W70B
ProcedureProcedure
1. Connect the base station power and the network using method a or method b.
Method A - AC Power OptionMethod A - AC Power Option Method B - PoE (Power over Ethernet) OptionMethod B - PoE (Power over Ethernet) Option
 TIPTIP
If you choose method a, use Yealink supplied power adapter (5V/1.2A). A third-party power adapter
may damage the device.
If you choose method b, you do not need to connect the power adapter. Make sure the hub/switch is
PoE-compliant.
W70B Quick Start
1