Yealink W70B - Register Devices to W70 B

No.No. ItemItem DescriptionDescription
1 Registration LED
Indicate the handset registration status or the base station is in the
paging mode.
2
Network Status
LED
Indicate the network status.
3
Power LED
Indicator
Indicate the power status of the base station.
4 Paging Key
Locate a misplaced handset.
Toggle to select the registration mode.
Reset the base station to factory settings.
If you want to see the power LED indicator of other devices, see the corresponding:
Register Devices to W70BRegister Devices to W70B
See Register Devices to W70B for more information.
The table below lists the available devices that can be registered to W70B:
Supported DevicesSupported Devices Maximum Number of Paired Devices (Simultaneously)Maximum Number of Paired Devices (Simultaneously)
W70B Quick Start
3