Yealink W70B - Assign Accounts to Registered Devices; Deploy W70 B Single-Cell Solution; FAQ

Assign Accounts to Registered DevicesAssign Accounts to Registered Devices
After the handset is registered to the base station, you can assign one or more outgoing lines or incoming lines for
the handset.
1. Log in to the web user interface of W70B as an admin.
2. Go to AccountAccount > Number AssignmentNumber Assignment.
Deploy W70B Single-Cell SolutionDeploy W70B Single-Cell Solution
If you want to deploy multiple W70Bs with RT30 repeaters, see Deploy W70B Single Cell Solution.
FAQFAQ
If there is a sudden power failure, what do I need to do after the power comes?
 TIPTIP
You can only assign one outgoing line and one incoming line for the CP930W, and make sure that the outgoing
line and the incoming line are the same lines.
W70B Quick Start
6