Yealink W70B - W78 H Hardware

Using the Headset to Manage Calls
Registering Headsets to W70B
1
2
3
Push
Retrieve
Redial
Scene: If you are using the handset to
answer the call, go to Options →
Push on the handset, you can push
the call to the headset.
After you pair the headset with a handset registered on the W70B, both the headset and handset will ring when receiving an incoming call.
Scene: If you are using the headset to
answer the call, hold the TRAN key
on the handset, you can retrieve the
call to the handset.
Scene: Double press the Call Control
button on the headset. You can
directly call the last call record.
Note: If you had configured the speed
dial number, the headset would dial
out the number when you double-
press the button.