Registering the Headset
Registering Headsets to W70B
• If the registration is not successful within 2 minutes, the
headset will exit the registration mode and automatically
reconnect to the previously registered Base.
• If the registration is not successful or the reconnection fails
within 10 minutes, the headset will power off and needs to
be restarted.
2
① Reboot the headset and put the headset into the
registration mode according to the following steps.
② After the headset and W70B are all in the
registration mode, the headset will automatically
register to the W70B.
When the Call Control button flashes blue and the
voice prompts “headset connected,” you
successfully register the headset to the base
.
To Next Page
Loading...
